Automatic Stator Lacing Machine ( Stator Coil Lacer ) With PLC
1.This stator coil lacing machine is controlled by PCL controller.
2. Double needles lacing the overhang winding each side
3. The coil lacing machine is characterized by compact appearance,
fast speed and low noise.
4. This coil lacing machine will automatically feeding and cutting
5. The coil lacing machine is controlled by servo system.
6. PLC and touch screen control.
Loading stator vertically; equipped with pressing, automatic
feeding, automatic cutting device, etc.; overhang winding adopts
twin needle lacing by servo system simultaneously; needle indexing,
hooking and stator indexing are controlled by servo system; spindle
adopts frequency speed control; slot by slot lacing, interval
lacing, and fancy lacing could be achieved by setting in
human-machine interface; characterized by compact appearance, fast
speed .low noise; simple operation and easy tooling change.
Fast speed , low noise; simple operation and easy tooling change,
double sides lacing simultaneously. PLC and touch screen control,
The automatic stator coil lacing machine is suitable for lacing the
oven-hang of the induction motor stator. It is used for stator
which meets the specification of below.
Min. stator ID
Max. stator OD
Stator stack length
1570 x 670 x 1680mm